Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, length: 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-046-5960, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS17160-14
NSN:5340-00-046-5960 FSC:5340 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
width
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
length
0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
material
STEEL OVERALL
overall_height
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
loop/holding_dimension
0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.117 INCHES MINIMUM IN
material_document_and_classification
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-00-046-5960
COMPONENT DIAGRAM
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
WIDTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.117 INCHES MINIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING DIMENSION
0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
MOUNTING METHOD
UNTHREADED HOLE(S)
OVERALL HEIGHT
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
WIDTH
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.007 INCHES MINIMUM AND 0.013 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.117 INCHES MINIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17160-14?
MS17160-14 is a CLIP,SPRING TENSION.
What parts can replace MS17160-14?
There are 24 known substitutes for MS17160-14: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 21 more. Substitute compatibility should be verified for your specific system.
Is MS17160-14 still available?
MS17160-14 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.