PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MRC5310
MRC5310 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 50.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 1.7500 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5832, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRC5310
NSN: 3110-00-554-5832
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter50.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width1.7500 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
style_designatorLOADING GROOVE, NON-SEPARABLE
lubrication_materialGREASE
overall_outside_diameter110.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-554-5832
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MRC5310 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 110.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER110.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
CONTACT ANGLE25.0 DEGREES MAXIMUM
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
S47-036Interchangeable
interchangeable cross-reference
interchangeable
2805Interchangeable
interchangeable cross-reference
interchangeable
18X2Interchangeable
interchangeable cross-reference
interchangeable
P108Interchangeable
interchangeable cross-reference
interchangeable
391-1042-036Interchangeable
interchangeable cross-reference
interchangeable
3910381059Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MRC5310?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MRC5310?
MRC5310 is a BEARING,BALL,ANNULAR.
What parts can replace MRC5310?
There are 33 known substitutes for MRC5310: S47-036, 2805, 18X2 and 30 more. Substitute compatibility should be verified for your specific system.
Is MRC5310 still available?
MRC5310 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MRC5310

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026