PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P108
P108 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include diameter: 0.500 INCHES NOMINAL IN, material: STEEL OVERALL, bore_shape: STRAIGHT, point_type: STANDARD, bore_diameter: 50.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3389, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P108
NSN: 5315-00-010-3389
FSC: 5315
CAGE: 22888 — FMC CORP (USA)
SPECIFICATIONS
diameter0.500 INCHES NOMINAL IN
materialSTEEL OVERALL
bore_shapeSTRAIGHT
point_typeSTANDARD
bore_diameter50.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width1.625 INCHES NOMINAL IN
terminal_typeSOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
load_directionANGULAR
overall_height1.000 INCHES NOMINAL IN
overall_length1.656 INCHES NOMINAL IN
shell_materialSTEEL
NSN5315-00-010-3389
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P108 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.500 INCHES NOMINAL IN
•
POINT TYPE: STANDARD
•
UNDERLOOP LENGTH: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.500 INCHES NOMINAL IN
POINT TYPESTANDARD
UNDERLOOP LENGTH2.000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
P108Interchangeable
interchangeable cross-reference
interchangeable
103389Interchangeable
interchangeable cross-reference
interchangeable
28-05Interchangeable
interchangeable cross-reference
interchangeable
112-305Interchangeable
interchangeable cross-reference
interchangeable
15613Interchangeable
interchangeable cross-reference
interchangeable
AS954 TY2CL3STBInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P108?
P108 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace P108?
There are 22 known substitutes for P108: P108, 103389, 28-05 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P108?
P108 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3389. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026