PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MILP17416
MILP17416 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include special_features: CONTAIN NON-ASBESTOS MATERIALS, cross-sectional_width: 0.375 INCHES NOMINAL IN, cross-sectional_height: 0.375 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-1744, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MILP17416
NSN: 5330-00-186-1744
FSC: 5330
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
special_featuresCONTAIN NON-ASBESTOS MATERIALS
cross-sectional_width0.375 INCHES NOMINAL IN
cross-sectional_height0.375 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-00-186-1744
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MILP17416 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
FABRICATION METHOD: BRAIDED
•
TEMP RATING: 500.0 CELSIUS DEGC
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESQUARE
FABRICATION METHODBRAIDED
TEMP RATING500.0 CELSIUS DEGC
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.188 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.188 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
TEMP RATING500.0 CELSIUS DEGC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
MILP17416Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-17416 3-8 IN SQInterchangeable
interchangeable cross-reference
interchangeable
807222-38Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-24377Interchangeable
interchangeable cross-reference
interchangeable
STYLE 8010Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-17416 3/1 6 IN SQInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILP17416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILP17416?
MILP17416 is a PACKING MATERIAL.
What parts can replace MILP17416?
There are 9 known substitutes for MILP17416: MILP17416, MIL-P-17416 3-8 IN SQ, 807222-38 and 6 more. Substitute compatibility should be verified for your specific system.
Is MILP17416 still available?
MILP17416 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILP17416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026