PartsTable
Technical Data Sheet
PartsTable / COMPONENT / STYLE 8010
STYLE 8010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include fabrication_method: BRAIDED, cross-sectional_width: 0.188 INCHES NOMINAL IN, cross-sectional_height: 0.188 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE, environmental_attribute_code: ASBESTOS ALTERNATIVE PRODUCTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-439-4917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STYLE 8010
NSN: 5330-01-439-4917
FSC: 5330
CAGE: 4R345 — AMERICAN BRAIDING & MANUFACTURING INC (USA)
SPECIFICATIONS
fabrication_methodBRAIDED
cross-sectional_width0.188 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-439-4917
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: STYLE 8010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL WIDTH: 0.188 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
FABRICATION METHOD: BRAIDED
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL WIDTH0.188 INCHES NOMINAL IN
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE
FABRICATION METHODBRAIDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
MIL-P-17416Interchangeable
interchangeable cross-reference
interchangeable
8010Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-17416 3-8 IN SQInterchangeable
interchangeable cross-reference
interchangeable
807222-38Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-24377Interchangeable
interchangeable cross-reference
interchangeable
MILP17416 SYM 1430 5/16SQInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy STYLE 8010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is STYLE 8010?
STYLE 8010 is a PACKING MATERIAL.
What parts can replace STYLE 8010?
There are 9 known substitutes for STYLE 8010: MIL-P-17416, 8010, MIL-P-17416 3-8 IN SQ and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for STYLE 8010?
STYLE 8010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-439-4917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — STYLE 8010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026