PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-STD-102B
MIL-STD-102B ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_diameter: 50.0 MILLIMETERS NOMINAL MM, overall_width: 20.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, overall_outside_diameter: 90.0 MILLIMETERS NOMINAL MM, internal_fit-up_designation: LOOSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-9225, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-STD-102B
NSN: 3110-00-108-9225
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
bore_diameter50.0 MILLIMETERS NOMINAL MM
overall_width20.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
overall_outside_diameter90.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
standard_tolerance_designationABEC NO.1
NSN3110-00-108-9225
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MIL-STD-102B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL RETAINER
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH11.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL RETAINER
MATERIALRUBBER SYNTHETIC SEAL
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
Z99502Interchangeable
interchangeable cross-reference
interchangeable
12Z369-158Interchangeable
interchangeable cross-reference
interchangeable
11601752Interchangeable
interchangeable cross-reference
interchangeable
111-03002-8420Interchangeable
interchangeable cross-reference
interchangeable
MIL-STD-102BInterchangeable
interchangeable cross-reference
interchangeable
FFB171ATYPE111CLASS8GRADE00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-STD-102B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-STD-102B?
MIL-STD-102B is a BEARING,BALL,ANNULAR.
What parts can replace MIL-STD-102B?
There are 18 known substitutes for MIL-STD-102B: Z99502, 12Z369-158, 11601752 and 15 more. Substitute compatibility should be verified for your specific system.
Is MIL-STD-102B still available?
MIL-STD-102B is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-STD-102B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026