PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 111-03002-8420
111-03002-8420 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: WOOL SEAL, bore_shape: STRAIGHT, bore_diameter: 30.0 MILLIMETERS NOMINAL MM, overall_width: 16.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1177, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
111-03002-8420
NSN: 3110-00-109-1177
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialWOOL SEAL
bore_shapeSTRAIGHT
bore_diameter30.0 MILLIMETERS NOMINAL MM
overall_width16.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter62.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-109-1177
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 111-03002-8420 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
OVERALL OUTSIDE DIAMETER: 62.0 MILLIMETERS NOMINAL MM
•
MATERIAL: WOOL SEAL
•
BORE SHAPE: STRAIGHT
•
SEAL QUANTITY: 2
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
OVERALL OUTSIDE DIAMETER62.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH16.0 MILLIMETERS NOMINAL MM
MATERIALWOOL SEAL
BORE SHAPESTRAIGHT
MATERIALSTEEL RETAINER
SEAL QUANTITY2
SURFACE FINISHGROUND
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
6010-2RSInterchangeable
interchangeable cross-reference
interchangeable
9110PPInterchangeable
interchangeable cross-reference
interchangeable
608251Interchangeable
interchangeable cross-reference
interchangeable
6202A2RSJMILL3545Interchangeable
interchangeable cross-reference
interchangeable
62022RSJHBD0Interchangeable
interchangeable cross-reference
interchangeable
202KPPMILL3545Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 111-03002-8420?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 111-03002-8420?
111-03002-8420 is a BEARING,BALL,ANNULAR.
What parts can replace 111-03002-8420?
There are 11 known substitutes for 111-03002-8420: 6010-2RS, 9110PP, 608251 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 111-03002-8420?
111-03002-8420 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1177. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 111-03002-8420

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026