PartsTable
Technical Data Sheet

MIL-S-19622/19 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

MIL-S-19622/19: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, inside_diameter: 0.665 INCHES NOMINAL IN, material_document_and_classification: MIL-R-6855 CL 2,GR 40 MIL SPEC SINGLE MATERIAL RESPONSE INTERMEDIATE RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-053-1825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-S-19622/19
NSN: 5330-00-053-1825
NIINs: 000531825, 002022594, 002022596, 006904581, 007888714, 010040889, 010051294
FSC: 5330 — Packing and Gasket Materials
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
inside_diameter0.665 INCHES NOMINAL IN
material_document_and_classificationMIL-R-6855 CL 2,GR 40 MIL SPEC SINGLE MATERIAL RESPONSE INTERMEDIATE RING
NSN5330-00-053-1825
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: MIL-S-19622/19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: ELECTRICAL HARDWARE SUPPLIES
•
INTERMEDIATE RING QUANTITY: 2
•
OUTSIDE DIAMETER: 1.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 40 MIL SPEC 2ND MATERIAL RESPONSE INTERMEDIATE RING
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE INTERMEDIATE RING
•
INSIDE DIAMETER: 0.719 INCHES NOMINAL IN
•
HEIGHT: 1.000 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON AND RUBBER CHLOROPRENE CLASS CR INTERMEDIATE RING
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAELECTRICAL HARDWARE SUPPLIES
INTERMEDIATE RING QUANTITY2
OUTSIDE DIAMETER1.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855,GR 40 MIL SPEC 2ND MATERIAL RESPONSE INTERMEDIATE RING
CROSS-SECTIONAL SHAPE STYLEANGLE INTERMEDIATE RING
INSIDE DIAMETER0.719 INCHES NOMINAL IN
HEIGHT1.000 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON AND RUBBER CHLOROPRENE CLASS CR INTERMEDIATE RING
MATERIALPLASTIC POLYAMIDE NYLON TOP RING
MATERIALPLASTIC POLYAMIDE NYLON BOTTOM RING
SUBSTITUTES & CROSS-REFERENCES 8
M19622-13-0018Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M19622/19-007Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M19622-12-0014Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2666EReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS16922-12-0014Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M19622-11-0013Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy MIL-S-19622/19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-S-19622/19?
MIL-S-19622/19 is a PACKING ASSEMBLY.
What parts can replace MIL-S-19622/19?
There are 8 known substitutes for MIL-S-19622/19: M19622-13-0018, M19622/19-007, M19622-12-0014 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-S-19622/19?
MIL-S-19622/19 is cataloged in the U.S. Government catalog under NSN 5330-00-053-1825. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-S-19622/19

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.