PartsTable
Technical Data Sheet
Download PDF

M19622-13-0018 — BUSHING,NONMETALLIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M19622-13-0018: BUSHING,NONMETALLIC.

The BUSHING,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR AND PLASTIC POLYAMIDE NYLON, body_length: 0.343 INCHES NOMINAL IN, design_type: SINGLE CENTRALLY LOCATED HOLE, body_diameter: 0.908 INCHES NOMINAL IN, flange_height: 0.063 INCHES NOMINAL IN, overall_length: 0.813 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-053-1825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M19622-13-0018
NSN: 5330-00-053-1825
NIINs: 000531825, 013450242
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR AND PLASTIC POLYAMIDE NYLON
body_length0.343 INCHES NOMINAL IN
design_typeSINGLE CENTRALLY LOCATED HOLE
body_diameter0.908 INCHES NOMINAL IN
flange_height0.063 INCHES NOMINAL IN
overall_length0.813 INCHES NOMINAL IN
special_featuresWEAPON SYSTEM ESSENTIAL
style_designatorROUND CHAMFERED FLANGE
center_hole_diameter0.719 INCHES NOMINAL IN
criticality_code_justificationFEAT
NSN5330-00-053-1825
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M19622-13-0018 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: ELECTRICAL HARDWARE SUPPLIES
•
INTERMEDIATE RING QUANTITY: 2
•
OUTSIDE DIAMETER: 1.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 40 MIL SPEC 2ND MATERIAL RESPONSE INTERMEDIATE RING
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE INTERMEDIATE RING
•
INSIDE DIAMETER: 0.719 INCHES NOMINAL IN
•
HEIGHT: 1.000 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON AND RUBBER CHLOROPRENE CLASS CR INTERMEDIATE RING
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATAELECTRICAL HARDWARE SUPPLIES
INTERMEDIATE RING QUANTITY2
OUTSIDE DIAMETER1.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855,GR 40 MIL SPEC 2ND MATERIAL RESPONSE INTERMEDIATE RING
CROSS-SECTIONAL SHAPE STYLEANGLE INTERMEDIATE RING
INSIDE DIAMETER0.719 INCHES NOMINAL IN
HEIGHT1.000 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON AND RUBBER CHLOROPRENE CLASS CR INTERMEDIATE RING
MATERIALPLASTIC POLYAMIDE NYLON TOP RING
MATERIALPLASTIC POLYAMIDE NYLON BOTTOM RING
SUBSTITUTES & CROSS-REFERENCES 8
M19622/19-007Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M19622-12-0014Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2666EReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS16922-12-0014Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-S-19622/19Reference document
Same NSN cross-reference
Reference document — Identification reference
M19622-11-0013Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy M19622-13-0018?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M19622-13-0018?
M19622-13-0018 is a BUSHING,NONMETALLIC.
What parts can replace M19622-13-0018?
There are 8 known substitutes for M19622-13-0018: M19622/19-007, M19622-12-0014, 2666E and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M19622-13-0018?
M19622-13-0018 is cataloged in the U.S. Government catalog under NSN 5330-00-053-1825. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M19622-13-0018

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.