10117159 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

10117159: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, elongation_percentage: 120 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-118-3150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10117159

NSN: 5331-01-118-3150
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
center_hole_diameter	0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
elongation_percentage	120 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-01-118-3150

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 120 MAXIMUM

•

CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	120 MAXIMUM
CENTER HOLE DIAMETER	0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 8

MIL-R-83485/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

850000100-R11-010Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AMS-R-83485/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83485/1-010Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-010V835-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

V0835 2-010Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 10117159?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10117159?

10117159 is a O-RING.

What parts can replace 10117159?

There are 8 known substitutes for 10117159: MIL-R-83485/1, 850000100-R11-010, AMS-R-83485/1 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 10117159?

10117159 is cataloged in the U.S. Government catalog under NSN 5331-01-118-3150. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10117159 — O-RING

Request a Quote — 10117159