The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 22.505 INCHES NOMINAL IN, center_hole_diameter: 21.855 INCHES MINIMUM AND 22.055 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-006-2114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-R-83248C TYPEC 1 CLASS 1
NSN:5331-01-006-2114 FSC:5331 — O-ring CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
RUBBER FLUOROCARBON CLASS FPM
temp_rating
-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating
75.0 SHORE DUROMETER A NOMINAL
outside_diameter
22.505 INCHES NOMINAL IN
center_hole_diameter
21.855 INCHES MINIMUM AND 22.055 INCHES MAXIMUM IN
elongation_percentage
125 MAXIMUM
cross-sectional_height
0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN
5331-01-006-2114
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 22.505 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 21.855 INCHES MINIMUM AND 22.055 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
TEMP RATING
-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT
0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER
22.505 INCHES NOMINAL IN
HARDNESS RATING
75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE
125 MAXIMUM
CENTER HOLE DIAMETER
21.855 INCHES MINIMUM AND 22.055 INCHES MAXIMUM IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-R-83248C TYPEC 1 CLASS 1?
MIL-R-83248C TYPEC 1 CLASS 1 is a O-RING.
What parts can replace MIL-R-83248C TYPEC 1 CLASS 1?
There are 6 known substitutes for MIL-R-83248C TYPEC 1 CLASS 1: MS-28775-471, ARP568-471MILR7362TY1, SAE-AS83248/1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-R-83248C TYPEC 1 CLASS 1?
MIL-R-83248C TYPEC 1 CLASS 1 is cataloged in the U.S. Government catalog under NSN 5331-01-006-2114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.