PartsTable
Technical Data Sheet
PartsTable / O-RING / SAE-AS83248/1
SAE-AS83248/1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SAE-AS83248/1 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-020-0064, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AS83248/1
NSN: 5331-00-020-0064
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberSAE-AS83248/1
NSN5331-00-020-0064
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AS83248/1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248, CL 1 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248, CL 1 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALRUBBER FLUOROCARBON CLASS FPM
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
M83248/1-910Interchangeable
interchangeable cross-reference
interchangeable
137.000.825Interchangeable
interchangeable cross-reference
interchangeable
6V-4589Interchangeable
interchangeable cross-reference
interchangeable
D84232 PIECE 53Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-212Interchangeable
interchangeable cross-reference
interchangeable
2-212-V884-75Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE-AS83248/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AS83248/1?
SAE-AS83248/1 is a SAE-AS83248/1.
What parts can replace SAE-AS83248/1?
There are 32 known substitutes for SAE-AS83248/1: M83248/1-910, 137.000.825, 6V-4589 and 29 more. Substitute compatibility should be verified for your specific system.
Is SAE-AS83248/1 still available?
SAE-AS83248/1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AS83248/1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026