MIL-M-38510/29 — MICROCIRCUIT,DIGITAL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

MIL-M-38510/29: MICROCIRCUIT,DIGITAL.

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MAXIMUM IN, body_length: 0.840 INCHES MAXIMUM IN, features_provided: LOW POWER AND MONOLITHIC, output_logic_form: TRANSISTOR-TRANSISTOR LOGIC, inclosure_material: SILICON. This part is cataloged in the U.S.

Government catalog under NSN 5962-00-302-3963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-M-38510/29

NSN: 5962-00-302-3963
NIINs: 003023963, 012802665
FSC: 5962 — Microcircuits, Electronic
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

body_width	0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height	0.140 INCHES MAXIMUM IN
body_length	0.840 INCHES MAXIMUM IN
features_provided	LOW POWER AND MONOLITHIC
output_logic_form	TRANSISTOR-TRANSISTOR LOGIC
inclosure_material	SILICON
storage_temp_range	-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range	-55.0 TO 125.0 CELSIUS DEGC
input_circuit_pattern	4 INPUT
inclosure_configuration	DUAL-IN-LINE
terminal_surface_treatment	SOLDER
design_function_and_quantity	1 DECODER, BINARY CODED DECIMAL TO SEVEN SEGMENT AND 1 DRIVER
NSN	5962-00-302-3963

COMPONENT DIAGRAM

KEY FEATURES

•

INPUT CIRCUIT PATTERN: 4 INPUT

•

INCLOSURE MATERIAL: CERAMIC AND GLASS

•

TERMINAL SURFACE TREATMENT: SOLDER

•

DESIGN FUNCTION AND QUANTITY: 1 DECODER, BINARY CODED DECIMAL TO DECIMAL AND 1 DECODER, BINARY CODED DECIMAL TO ONE OF TEN AND 1 DECODER, FOUR TO TEN LINE AND 1 DRIVER, NIXIE

•

BODY WIDTH: 0.245 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN

•

BODY HEIGHT: 0.120 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN

•

FEATURES PROVIDED: HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/DECODED OUTPUT AND LOW POWER

•

INCLOSURE CONFIGURATION: DUAL-IN-LINE

TECHNICAL CHARACTERISTICS

INPUT CIRCUIT PATTERN	4 INPUT
INCLOSURE MATERIAL	CERAMIC AND GLASS
TERMINAL SURFACE TREATMENT	SOLDER
DESIGN FUNCTION AND QUANTITY	1 DECODER, BINARY CODED DECIMAL TO DECIMAL AND 1 DECODER, BINARY CODED DECIMAL TO ONE OF TEN AND 1 DECODER, FOUR TO TEN LINE AND 1 DRIVER, NIXIE
BODY WIDTH	0.245 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
BODY HEIGHT	0.120 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
FEATURES PROVIDED	HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/DECODED OUTPUT AND LOW POWER
INCLOSURE CONFIGURATION	DUAL-IN-LINE
CASE OUTLINE SOURCE AND DESIGNATOR	-0-001-AG JOINT ELECTRON DEVICE ENGINEERING COUNCIL
BODY LENGTH	0.750 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 9

SNC54L42JReference document

Same NSN cross-reference

Reference document — Secondary reference

DMS 85076BReference document

Same NSN cross-reference

Reference document — Secondary reference

DM54L42AJ/883Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

819158-0184ESame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5962-3802901BEXReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

DM54L42AJ/883BReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedDemilitarization required — critical (Q)

Ready to buy MIL-M-38510/29?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-M-38510/29?

MIL-M-38510/29 is a MICROCIRCUIT,DIGITAL.

What parts can replace MIL-M-38510/29?

There are 9 known substitutes for MIL-M-38510/29: SNC54L42J, DMS 85076B, DM54L42AJ/883 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-M-38510/29?

MIL-M-38510/29 is cataloged in the U.S. Government catalog under NSN 5962-00-302-3963. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-M-38510/29 — MICROCIRCUIT,DIGITAL

Request a Quote — MIL-M-38510/29