PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-H-8795A
MIL-H-8795A ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, vacuum_in_torr: 58.0, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-562-8824, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-H-8795A
NSN: 4720-00-562-8824
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
vacuum_in_torr58.0
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.188 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.766 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
NSN4720-00-562-8824
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: MIL-H-8795A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 52.000 INCHES MINIMUM WORKING AND 53.000 INCHES MAXIMUM WORKING IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
•
OPERATING PRESSURE: 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
HYDROSTATIC TEST PRESSURE: 4000.0 POUNDS PER SQUARE INCH LBS
•
OUTSIDE DIAMETER: 0.765 INCHES NOMINAL IN
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
INSIDE SURFACE CONDITION: SMOOTH
•
THREAD DIRECTION: RIGHT-HAND FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
MEASURING METHOD AND LENGTH52.000 INCHES MINIMUM WORKING AND 53.000 INCHES MAXIMUM WORKING IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
OPERATING PRESSURE2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
HYDROSTATIC TEST PRESSURE4000.0 POUNDS PER SQUARE INCH LBS
OUTSIDE DIAMETER0.765 INCHES NOMINAL IN
SEAT ANGLE37.0 DEGREES FIRST END
INSIDE SURFACE CONDITIONSMOOTH
THREAD DIRECTIONRIGHT-HAND FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
BURST TEST PRESSURE8000.0 POUNDS PER SQUARE INCH LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
390A32D0720Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-8795Interchangeable
interchangeable cross-reference
interchangeable
390AInterchangeable
interchangeable cross-reference
interchangeable
MS28741-24-1200Interchangeable
interchangeable cross-reference
interchangeable
MILH8795AInterchangeable
interchangeable cross-reference
interchangeable
MS28741-16-0130Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-H-8795A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-H-8795A?
MIL-H-8795A is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace MIL-H-8795A?
There are 21 known substitutes for MIL-H-8795A: 390A32D0720, MIL-DTL-8795, 390A and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-H-8795A?
MIL-H-8795A is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-562-8824. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-H-8795A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026