PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GHN10347-4
GHN10347-4 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.875 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-684-4505, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GHN10347-4
NSN: 4720-00-684-4505
FSC: 4720
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.875 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.234 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure3200.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.312 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN4720-00-684-4505
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: GHN10347-4 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
•
MEASURING METHOD AND LENGTH: 13.000 INCHES NOMINAL WORKING IN
•
SPECIFICATION/STANDARD DATA: 96906-MS28741 GOVERNMENT STANDARD
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 7.300 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD
MEASURING METHOD AND LENGTH13.000 INCHES NOMINAL WORKING IN
SPECIFICATION/STANDARD DATA96906-MS28741 GOVERNMENT STANDARD
CONNECTION STYLESWIVEL NUT FLARE FIRST END
END CONNECTION DESIGNSTRAIGHT FIRST END
MINIMUM INSIDE BENDING RADIUS7.300 INCHES IN
THREAD DIRECTIONRIGHT-HAND FIRST END
INSIDE DIAMETER0.875 INCHES NOMINAL IN
INSIDE SURFACE CONDITIONSMOOTH
THREAD SERIES DESIGNATORUN FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
7973943Interchangeable
interchangeable cross-reference
interchangeable
MILH8795AInterchangeable
interchangeable cross-reference
interchangeable
MS28741-8-0524Interchangeable
interchangeable cross-reference
interchangeable
390A32D0720Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-8795Interchangeable
interchangeable cross-reference
interchangeable
390AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy GHN10347-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GHN10347-4?
GHN10347-4 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace GHN10347-4?
There are 20 known substitutes for GHN10347-4: 7973943, MILH8795A, MS28741-8-0524 and 17 more. Substitute compatibility should be verified for your specific system.
Is GHN10347-4 still available?
GHN10347-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GHN10347-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026