PartsTable
Technical Data Sheet
Download PDF

MIL-DTL-17508 — MOUNT,RESILIENT,WEAPON SYSTEM

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

MIL-DTL-17508: MOUNT,RESILIENT,WEAPON SYSTEM.

The MOUNT,RESILIENT,WEAPON SYSTEM is a the manufacturer industrial component. Key specifications include height: 6.284 INCHES MINIMUM AND 6.316 INCHES MAXIMUM IN, flange_width: 8.750 INCHES NOMINAL IN, flange_length: 11.375 INCHES NOMINAL IN, special_features: CONSISTS OF ONE LOADING NUT; ONE SLEEVE AND MOLDING, surface_treatment: PAINT FLANGE, distance_from_flange_to_end: 3.764 INCHES MINIMUM AND 3.796 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5342-00-543-3574, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-DTL-17508
NSN: 5342-00-543-3574
NIINs: 005433574, 005433575, 005988824, 005988825, 006644473, 010205071, 010205589, 012106154, 012106155, 012691048, 012727822, 013017949
FSC: 5342 — Hardware, Weapon System
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
height6.284 INCHES MINIMUM AND 6.316 INCHES MAXIMUM IN
flange_width8.750 INCHES NOMINAL IN
flange_length11.375 INCHES NOMINAL IN
special_featuresCONSISTS OF ONE LOADING NUT; ONE SLEEVE AND MOLDING
surface_treatmentPAINT FLANGE
distance_from_flange_to_end3.764 INCHES MINIMUM AND 3.796 INCHES MAXIMUM IN
flange_mounting_hole_diameter0.938 INCHES NOMINAL IN
distance_between_mounting_hole_centers9.625 INCHES NOMINAL IN
NSN5342-00-543-3574
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MOUNT,RESILIENT,WEAPON SYSTEM TITLE COMPONENT PN MIL-DTL-17508 MFR MOUNT,RESILIENT,WEAPON
KEY FEATURES
•
FLANGE MOUNTING HOLE DIAMETER: 0.516 INCHES NOMINAL IN
•
LOAD RATING: 100.000 POUNDS MAXIMUM LBS
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 4.750 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.438 INCHES NOMINAL IN
•
FLANGE LENGTH: 5.875 INCHES NOMINAL IN
•
DISTANCE FROM FLANGE TO END: 1.875 INCHES NOMINAL IN
•
LOAD/FREQUENCY RANGE: 50 LB LOAD FOR 7.65 TO 8.65 HZ LBS
•
NONDEFINITIVE SPEC/STD DATA: 6E100 TYPE
TECHNICAL CHARACTERISTICS
FLANGE MOUNTING HOLE DIAMETER0.516 INCHES NOMINAL IN
LOAD RATING100.000 POUNDS MAXIMUM LBS
DISTANCE BETWEEN MOUNTING HOLE CENTERS4.750 INCHES NOMINAL IN
FLANGE THICKNESS0.438 INCHES NOMINAL IN
FLANGE LENGTH5.875 INCHES NOMINAL IN
DISTANCE FROM FLANGE TO END1.875 INCHES NOMINAL IN
LOAD/FREQUENCY RANGE50 LB LOAD FOR 7.65 TO 8.65 HZ LBS
NONDEFINITIVE SPEC/STD DATA6E100 TYPE
INSIDE DIAMETER0.641 INCHES NOMINAL IN
HEIGHT2.500 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
5000-1112-1385778REVHPC6E100Reference document
Same NSN cross-reference
Reference document — Secondary reference
6E100Reference document
Same NSN cross-reference
Reference document — Informative reference only
10500-44Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5000-S1112-13857786E100Reference document
Same NSN cross-reference
Reference document — Secondary reference
PL-AA6-13 ITEMReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
31114-1Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-DTL-17508?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-17508?
MIL-DTL-17508 is a MOUNT,RESILIENT,WEAPON SYSTEM.
What parts can replace MIL-DTL-17508?
There are 7 known substitutes for MIL-DTL-17508: 5000-1112-1385778REVHPC6E100, 6E100, 10500-44 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-17508?
MIL-DTL-17508 is cataloged in the U.S. Government catalog under NSN 5342-00-543-3574. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-DTL-17508

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.