PartsTable
Technical Data Sheet
Download PDF

31114-1 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

31114-1: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include height: 2.500 INCHES NOMINAL IN, material: STEEL OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.562 INCHES NOMINAL IN, load_rating: 100.000 POUNDS MAXIMUM LBS, shaft_style: ROUND, SLOTTED. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-023-9048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 31114-1
NSN: 5905-00-023-9048
NIINs: 000239048, 005433574
FSC: 5905 — Resistor
CAGE: 80009 — TEKTRONIX, INC. (USA)
SPECIFICATIONS
height2.500 INCHES NOMINAL IN
materialSTEEL OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.562 INCHES NOMINAL IN
load_rating100.000 POUNDS MAXIMUM LBS
shaft_styleROUND, SLOTTED
flange_width3.375 INCHES NOMINAL IN
shaft_length0.750 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.188 INCHES NOMINAL IN
flange_length5.875 INCHES NOMINAL IN
overall_length0.828 INCHES NOMINAL IN
NSN5905-00-023-9048
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 31114-1 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
NONTURN DEVICE LOCATION: AT 9 OCLOCK
•
BODY DIAMETER: 1.188 INCHES NOMINAL IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 2.0 KILOHMS SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.125 INCHES NOMINAL IN
•
NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL IN
•
BODY STYLE: CYLINDRICAL BUSHING MOUNTED
TECHNICAL CHARACTERISTICS
NONTURN DEVICE LOCATIONAT 9 OCLOCK
BODY DIAMETER1.188 INCHES NOMINAL IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION2.0 KILOHMS SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.125 INCHES NOMINAL IN
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL IN
BODY STYLECYLINDRICAL BUSHING MOUNTED
OVERALL DIAMETER1.125 INCHES NOMINAL IN
MOUNTING METHODSTANDARD BUSHING
SUBSTITUTES & CROSS-REFERENCES 2
CM23643Reference document
Same NSN cross-reference
Reference document — Secondary reference
CM22252Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 31114-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 31114-1?
31114-1 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 31114-1?
There are 2 known substitutes for 31114-1: CM23643, CM22252. Substitute compatibility should be verified for your specific system.
What is the NSN for 31114-1?
31114-1 is cataloged in the U.S. Government catalog under NSN 5905-00-023-9048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 31114-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.