PartsTable
Technical Data Sheet

MIL-B-81934/2-1 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

MIL-B-81934/2-1: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER, corner_shape: SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 0.7975 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN, special_features: PLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-121-0435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-B-81934/2-1
NSN: 3120-01-121-0435
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
corner_shapeSQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
flange_width0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length0.7975 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
special_featuresPLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.7505 INCHES MINIMUM AND 0.7515 INCHES MAXIMUM IN
body_outside_diameter0.9388 INCHES MINIMUM AND 0.9393 INCHES MAXIMUM IN
flange_outside_diameter1.4800 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
NSN3120-01-121-0435
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: MIL-B-81934/2-1 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
FLANGE OUTSIDE DIAMETER: 1.4800 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 0.9388 INCHES MINIMUM AND 0.9393 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER1.4800 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.9388 INCHES MINIMUM AND 0.9393 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
SUBSTITUTES & CROSS-REFERENCES 6
M81934/2-12C024Reference document
Same NSN cross-reference
Reference document — Secondary reference
M81934/2Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-81934/2Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS81934/2Reference document
Same NSN cross-reference
Reference document — Secondary reference
9412259363Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
KRJ12-UDSV-024Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-B-81934/2-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-B-81934/2-1?
MIL-B-81934/2-1 is a BEARING,SLEEVE.
What parts can replace MIL-B-81934/2-1?
There are 6 known substitutes for MIL-B-81934/2-1: M81934/2-12C024, M81934/2, MIL-B-81934/2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-B-81934/2-1?
MIL-B-81934/2-1 is cataloged in the U.S. Government catalog under NSN 3120-01-121-0435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-B-81934/2-1