PartsTable
Technical Data Sheet

M81934/2 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

M81934/2: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER, corner_shape: SQUARE ALL CORNERS, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 1.3650 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN, style_designator: SOLID, EXTERNAL FLANGE ONE END, body_inside_diameter: 0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-030-4716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81934/2
NSN: 3120-01-030-4716
NIINs: 010304716, 011210435, 014552909, 014562923
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
corner_shapeSQUARE ALL CORNERS
flange_width0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length1.3650 INCHES MINIMUM AND 1.3750 INCHES MAXIMUM IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
body_outside_diameter0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN
end_item_identificationAIRCRAFT, AIRLIFTER C-17A A
flange_outside_diameter1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
NSN3120-01-030-4716
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: M81934/2 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER
FLANGE OUTSIDE DIAMETER1.7300 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER1.1893 INCHES MINIMUM AND 1.1903 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
KDJ16A010-342Reference document
Same NSN cross-reference
Reference document — Secondary reference
123-0216A010Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS81934/2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
KRJ16HDYB-16A010MReference document
Same NSN cross-reference
Reference document — Secondary reference
ADLF16A010Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-81934/2Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy M81934/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81934/2?
M81934/2 is a BEARING,SLEEVE.
What parts can replace M81934/2?
There are 9 known substitutes for M81934/2: KDJ16A010-342, 123-0216A010, AS81934/2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81934/2?
M81934/2 is cataloged in the U.S. Government catalog under NSN 3120-01-030-4716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81934/2