PartsTable
Technical Data Sheet
Download PDF

MDW6A1173 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MDW6A1173: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_diameter: 0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, load_direction: ANGULAR, inner_ring_width: 1.1855 INCHES MINIMUM AND 1.1880 INCHES MAXIMUM IN, outer_ring_width: 1.0580 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN, special_features: 40 TO 50 PCT FULL OF SPECIFIED LUBRICANT. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-130-6153, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MDW6A1173
NSN: 3110-01-130-6153
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 3NPS1 — RBC AIRCRAFT PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_diameter0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
seal_quantity2
load_directionANGULAR
inner_ring_width1.1855 INCHES MINIMUM AND 1.1880 INCHES MAXIMUM IN
outer_ring_width1.0580 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN
special_features40 TO 50 PCT FULL OF SPECIFIED LUBRICANT
style_designatorDOUBLE ROW
bearing_seal_typeCONTACT
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
lubrication_materialGREASE
overall_outside_diameter1.0621 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
NSN3110-01-130-6153
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MDW6A1173 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 1.0580 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: DOUBLE ROW
•
OVERALL OUTSIDE DIAMETER: 1.0621 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
•
LOAD DIRECTION: ANGULAR
•
SURFACE TREATMENT: CADMIUM EXPOSED SURFACES AS MOUNTED
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH1.0580 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN
STYLE DESIGNATORDOUBLE ROW
OVERALL OUTSIDE DIAMETER1.0621 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
SPECIAL FEATURES40 TO 50 PCT FULL OF SPECIFIED LUBRICANT
SURFACE TREATMENTCADMIUM EXPOSED SURFACES AS MOUNTED
SEAL QUANTITY2
BORE DIAMETER0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
MDW6-400Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy MDW6A1173?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MDW6A1173?
MDW6A1173 is a BEARING,BALL,AIRFRAME.
What parts can replace MDW6A1173?
There is 1 known substitute for MDW6A1173: MDW6-400. Substitute compatibility should be verified for your specific system.
What is the NSN for MDW6A1173?
MDW6A1173 is cataloged in the U.S. Government catalog under NSN 3110-01-130-6153. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MDW6A1173