PartsTable
Technical Data Sheet
Download PDF

MDW6-400 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

MDW6-400: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_diameter: 0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, load_direction: ANGULAR, inner_ring_width: 1.1855 INCHES MINIMUM AND 1.1880 INCHES MAXIMUM IN, outer_ring_width: 1.0580 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN, special_features: 40 TO 50 PCT FULL OF SPECIFIED LUBRICANT. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-123-6945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MDW6-400
NSN: 3110-01-123-6945
NIINs: 011236945, 011306153
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_diameter0.3747 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
seal_quantity2
load_directionANGULAR
inner_ring_width1.1855 INCHES MINIMUM AND 1.1880 INCHES MAXIMUM IN
outer_ring_width1.0580 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM IN
special_features40 TO 50 PCT FULL OF SPECIFIED LUBRICANT
style_designatorDOUBLE ROW
bearing_seal_typeCONTACT
surface_treatmentCADMIUM EXPOSED SURFACES AS MOUNTED
lubrication_materialGREASE
overall_outside_diameter1.0621 INCHES MINIMUM AND 1.0625 INCHES MAXIMUM IN
NSN3110-01-123-6945
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MDW6-400 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 1.0630 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
•
STYLE DESIGNATOR: DOUBLE ROW
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES BALL
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH1.0630 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
STYLE DESIGNATORDOUBLE ROW
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES BALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3652 ASSN STD 1ST MATERIAL RESPONSE SEAL
OVERALL OUTSIDE DIAMETER1.0625 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
AS27647Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS27647-6RReference document
Same NSN cross-reference
Reference document — Secondary reference
MDW6FS464Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy MDW6-400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MDW6-400?
MDW6-400 is a BEARING,BALL,AIRFRAME.
What parts can replace MDW6-400?
There are 3 known substitutes for MDW6-400: AS27647, MS27647-6R, MDW6FS464. Substitute compatibility should be verified for your specific system.
What is the NSN for MDW6-400?
MDW6-400 is cataloged in the U.S. Government catalog under NSN 3110-01-123-6945. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MDW6-400