PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AE1000881N0204
AE1000881N0204 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, exterior_color: NATURAL, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 1.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-009-3651, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AE1000881N0204
NSN: 4720-01-009-3651
FSC: 4720
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
exterior_colorNATURAL
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter1.125 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.437 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure2000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.625 INCHES FIRST END IN
NSN4720-01-009-3651
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: AE1000881N0204 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3B FIRST END
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
OPERATING PRESSURE: 500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
EXTERIOR COLOR: NATURAL
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT (UNJ) FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS3B FIRST END
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
OPERATING PRESSURE500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
EXTERIOR COLORNATURAL
THREAD DIRECTIONRIGHT-HAND FIRST END
CONNECTION STYLESWIVEL NUT FLARE FIRST END
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT (UNJ) FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
OUTSIDE DIAMETER1.437 INCHES NOMINAL IN
OUTER COVERING ENVIRONMENTAL PROTECTIONCORROSION RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
S850D0220DInterchangeable
interchangeable cross-reference
interchangeable
156001-6D-0220Interchangeable
interchangeable cross-reference
interchangeable
AE1006703G0220Interchangeable
interchangeable cross-reference
interchangeable
GH12GInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83796/1Interchangeable
interchangeable cross-reference
interchangeable
M83796/1E067AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AE1000881N0204?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AE1000881N0204?
AE1000881N0204 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AE1000881N0204?
There are 27 known substitutes for AE1000881N0204: S850D0220D, 156001-6D-0220, AE1006703G0220 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AE1000881N0204?
AE1000881N0204 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-009-3651. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AE1000881N0204

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026