PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M83796/1K210C
M83796/1K210C ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M83796/1K210C is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-284-6909, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83796/1K210C
NSN: 4720-01-284-6909
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83796/1K210C
NSN4720-01-284-6909
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M83796/1K210C · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: REUSABLE END FITTINGS
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
OUTSIDE DIAMETER: 0.938 INCHES NOMINAL IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
TEMP RATING: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
INSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 4.500 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDREUSABLE END FITTINGS
THREAD DIRECTIONRIGHT-HAND FIRST END
OUTSIDE DIAMETER0.938 INCHES NOMINAL IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
TEMP RATING-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
INSIDE DIAMETER0.688 INCHES NOMINAL IN
MINIMUM INSIDE BENDING RADIUS4.500 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
END CONNECTION DESIGNSTRAIGHT FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
24522Interchangeable
interchangeable cross-reference
interchangeable
24552Interchangeable
interchangeable cross-reference
interchangeable
35380Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83796/1Interchangeable
interchangeable cross-reference
interchangeable
M83796/1H390AInterchangeable
interchangeable cross-reference
interchangeable
35380-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83796/1K210C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83796/1K210C?
M83796/1K210C is a M83796/1K210C.
What parts can replace M83796/1K210C?
There are 23 known substitutes for M83796/1K210C: 24522, 24552, 35380 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83796/1K210C?
M83796/1K210C is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-284-6909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83796/1K210C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026