PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 35380-11
35380-11 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The SUPPORT,TUBING,AIRCRAFT is a the manufacturer industrial component. Key specifications include flow_angle: 45.0 DEGREES SECOND END, inside_diameter: 0.688 INCHES NOMINAL IN, outside_diameter: 0.938 INCHES NOMINAL IN, unable_to_decode: UNABLE TO DECODE, features_provided: REUSABLE END FITTINGS, operating_pressure: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-284-1660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
35380-11
NSN: 4720-01-284-1660
FSC: 4720
CAGE: 91161 — ELECTRO IMPULSE LABORATORY INC DBA ELECTRO IMPULSE INC (USA)
SPECIFICATIONS
flow_angle45.0 DEGREES SECOND END
inside_diameter0.688 INCHES NOMINAL IN
outside_diameter0.938 INCHES NOMINAL IN
unable_to_decodeUNABLE TO DECODE
features_providedREUSABLE END FITTINGS
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure3750.0 POUNDS PER SQUARE INCH LBS
end_connection_designELBOW SECOND END
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
hydrostatic_test_pressure2000.0 POUNDS PER SQUARE INCH LBS
cross-sectional_shape_styleROUND
NSN4720-01-284-1660
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 35380-11 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.938 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 4.500 INCHES IN
•
FEATURES PROVIDED: REUSABLE END FITTINGS
•
END CONNECTION DESIGN: ELBOW SECOND END
•
INSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
UNABLE TO DECODE: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.938 INCHES NOMINAL IN
MINIMUM INSIDE BENDING RADIUS4.500 INCHES IN
FEATURES PROVIDEDREUSABLE END FITTINGS
END CONNECTION DESIGNELBOW SECOND END
INSIDE DIAMETER0.688 INCHES NOMINAL IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
UNABLE TO DECODEUNABLE TO DECODE
UNABLE TO DECODEUNABLE TO DECODE
UNABLE TO DECODEUNABLE TO DECODE
UNABLE TO DECODEUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
24522Interchangeable
interchangeable cross-reference
interchangeable
24552Interchangeable
interchangeable cross-reference
interchangeable
35380Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-83796/1Interchangeable
interchangeable cross-reference
interchangeable
M83796/1H390AInterchangeable
interchangeable cross-reference
interchangeable
35380-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 35380-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 35380-11?
35380-11 is a SUPPORT,TUBING,AIRCRAFT.
What parts can replace 35380-11?
There are 21 known substitutes for 35380-11: 24522, 24552, 35380 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 35380-11?
35380-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-284-1660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 35380-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026