PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M83796/1G070C
M83796/1G070C ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M83796/1G070C is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-260-7313, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83796/1G070C
NSN: 4720-01-260-7313
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83796/1G070C
NSN4720-01-260-7313
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M83796/1G070C · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HYDROSTATIC TEST PRESSURE: 3000.0 POUNDS PER SQUARE INCH LBS
•
TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 0.570 INCHES NOMINAL IN
•
MINIMUM INSIDE BENDING RADIUS: 2.500 INCHES IN
•
END CONNECTION DESIGN: ELBOW SECOND END
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
THREAD CLASS: 3B FIRST END
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
HYDROSTATIC TEST PRESSURE3000.0 POUNDS PER SQUARE INCH LBS
TEMP RATING-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER0.570 INCHES NOMINAL IN
MINIMUM INSIDE BENDING RADIUS2.500 INCHES IN
END CONNECTION DESIGNELBOW SECOND END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
THREAD CLASS3B FIRST END
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
THREAD DIRECTIONRIGHT-HAND SECOND END
NOMINAL THREAD SIZE0.562 INCHES SECOND END IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
MIL-DTL-83796/1Interchangeable
interchangeable cross-reference
interchangeable
M83796/1N0204AInterchangeable
interchangeable cross-reference
interchangeable
AE1000881N0204Interchangeable
interchangeable cross-reference
interchangeable
S850D0220DInterchangeable
interchangeable cross-reference
interchangeable
156001-6D-0220Interchangeable
interchangeable cross-reference
interchangeable
AE1006703G0220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83796/1G070C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83796/1G070C?
M83796/1G070C is a M83796/1G070C.
What parts can replace M83796/1G070C?
There are 27 known substitutes for M83796/1G070C: MIL-DTL-83796/1, M83796/1N0204A, AE1000881N0204 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83796/1G070C?
M83796/1G070C is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-260-7313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83796/1G070C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026