8900630P24 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

8900630P24: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.066 INCHES NOMINAL IN, center_hole_diameter: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-107-1149, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

8900630P24

NSN: 5331-01-107-1149
FSC: 5331 — O-ring
CAGE: 97424 — AMETEK INC DIV AEROSPACE AND DEFENSE (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.066 INCHES NOMINAL IN
center_hole_diameter	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-01-107-1149

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.066 INCHES NOMINAL IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.066 INCHES NOMINAL IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.917 INCHES MINIMUM AND 0.935 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 6

AMS-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

M83461-1-021Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

45122=23Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10331328Reference document

Same NSN cross-reference

Reference document — Informative reference only

SAE-AS83461/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy 8900630P24?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 8900630P24?

8900630P24 is a O-RING.

What parts can replace 8900630P24?

There are 6 known substitutes for 8900630P24: AMS-P-83461/1, M83461-1-021, MIL-P-83461/1 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 8900630P24?

8900630P24 is cataloged in the U.S. Government catalog under NSN 5331-01-107-1149. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

8900630P24 — O-RING

Request a Quote — 8900630P24