PartsTable
Technical Data Sheet
Download PDF

M83248-2-015ES — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M83248-2-015ES: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, outside_diameter: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN, center_hole_diameter: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-1087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248-2-015ES
NSN: 5331-00-166-1087
FSC: 5331 — O-ring
CAGE: H2313 — ERIKS B.V. (NLD)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
outside_diameter0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
center_hole_diameter0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-166-1087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248-2-015ES MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 7
2-015V709-90Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M83248/2-015Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS3581-015Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILR83248Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-015 V894-90Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7650 ITEM NO 5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy M83248-2-015ES?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248-2-015ES?
M83248-2-015ES is a O-RING.
What parts can replace M83248-2-015ES?
There are 7 known substitutes for M83248-2-015ES: 2-015V709-90, M83248/2-015, AS3581-015 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248-2-015ES?
M83248-2-015ES is cataloged in the U.S. Government catalog under NSN 5331-00-166-1087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248-2-015ES