PartsTable
Technical Data Sheet
Download PDF

AS3581-015 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS3581-015: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include end_item_identification: VALVE,AUTO S, criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-1087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS3581-015
NSN: 5331-00-166-1087
NIINs: 001661087, 016562398, 017211708
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
end_item_identificationVALVE,AUTO S
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-00-166-1087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS3581-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 7
M83248-2-015ESReference document
Same NSN cross-reference
Reference document — Secondary reference
2-015V709-90Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M83248/2-015Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MILR83248Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-015 V894-90Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7650 ITEM NO 5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AS3581-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS3581-015?
AS3581-015 is a O-RING.
What parts can replace AS3581-015?
There are 7 known substitutes for AS3581-015: M83248-2-015ES, 2-015V709-90, M83248/2-015 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS3581-015?
AS3581-015 is cataloged in the U.S. Government catalog under NSN 5331-00-166-1087. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS3581-015