PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-904CP
M83248/2-904CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-904CP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-096-8824, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-904CP
NSN: 5331-01-096-8824
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberM83248/2-904CP
NSN5331-01-096-8824
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-904CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2 CLASS
•
TEMP RATING: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2 CLASS
TEMP RATING-30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
0XN94-84904Interchangeable
interchangeable cross-reference
interchangeable
M-13950-AA-1 ITEM 15Interchangeable
interchangeable cross-reference
interchangeable
0XMS28778-4CPInterchangeable
interchangeable cross-reference
interchangeable
M83248/2-904Interchangeable
interchangeable cross-reference
interchangeable
M83248/-904Interchangeable
interchangeable cross-reference
interchangeable
431385 ITEM 41Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-904CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-904CP?
M83248/2-904CP is a M83248/2-904CP.
What parts can replace M83248/2-904CP?
There are 29 known substitutes for M83248/2-904CP: 0XN94-84904, M-13950-AA-1 ITEM 15, 0XMS28778-4CP and 26 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-904CP still available?
M83248/2-904CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-904CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026