PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M83248/2-216CP
M83248/2-216CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-216CP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-060-3404, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-216CP
NSN: 5330-01-060-3404
FSC: 5330
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83248/2-216CP
NSN5330-01-060-3404
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-216CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.387 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
CRITICALITY CODE JUSTIFICATIONZZZW
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.387 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
216-19359Interchangeable
interchangeable cross-reference
interchangeable
4564216EUInterchangeable
interchangeable cross-reference
interchangeable
5331PL1334898Interchangeable
interchangeable cross-reference
interchangeable
C-4412PL791PC10Interchangeable
interchangeable cross-reference
interchangeable
000216EEInterchangeable
interchangeable cross-reference
interchangeable
M83248/2-216Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-216CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-216CP?
M83248/2-216CP is a M83248/2-216CP.
What parts can replace M83248/2-216CP?
There are 16 known substitutes for M83248/2-216CP: 216-19359, 4564216EU, 5331PL1334898 and 13 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-216CP still available?
M83248/2-216CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-216CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026