PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-216
M83248/2-216 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-216 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-1110, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-216
NSN: 5331-00-166-1110
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83248/2-216
NSN5331-00-166-1110
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-216 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 1.387 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
MATERIALRUBBER FLUOROCARBON CLASS FPM
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER1.387 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.097 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
NAS1594-007Interchangeable
interchangeable cross-reference
interchangeable
2-007V709-90Interchangeable
interchangeable cross-reference
interchangeable
A211-8Interchangeable
interchangeable cross-reference
interchangeable
SAE AMS7259Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-386Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS3581Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-216?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-216?
M83248/2-216 is a M83248/2-216.
What parts can replace M83248/2-216?
There are 27 known substitutes for M83248/2-216: NAS1594-007, 2-007V709-90, A211-8 and 24 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-216 still available?
M83248/2-216 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-216

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026