PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-134

M83248/1-134 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, end_item_identification: VALVE,MANIFOLD REDUCING, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5122, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-134
NSN: 5331-00-167-5122
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER
end_item_identificationVALVE,MANIFOLD REDUCING
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5331-00-167-5122
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-134 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
•
TEMP RATING: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
27203Interchangeable
interchangeable cross-reference
interchangeable
27203DAInterchangeable
interchangeable cross-reference
interchangeable
MS9388-134Interchangeable
interchangeable cross-reference
interchangeable
XPG0261500044Interchangeable
interchangeable cross-reference
interchangeable
J221P134Interchangeable
interchangeable cross-reference
interchangeable
D80089-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-134?
M83248/1-134 is a O-RING.
What parts can replace M83248/1-134?
There are 27 known substitutes for M83248/1-134: 27203, 27203DA, MS9388-134 and 24 more. Substitute compatibility should be verified for your specific system.
Is M83248/1-134 still available?
M83248/1-134 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026