PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 27203
27203 ✓ Verified by PartsTable
InLine · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SOLENOID,ELECTRICAL is a InLine industrial component. Key specifications include length: 1200.00 INCHES NOMINAL IN, material: PLASTIC POLYVINYL CHLORIDE (PVC) OVERALL, temp_rating: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, unit_design: PORTABLE, document_type: PARTS LIST, overall_length: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-006-9830, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
27203
NSN: 5340-00-006-9830
FSC: 5340
CAGE: 61820 — UNIPRESS CORPORATION (USA)
SPECIFICATIONS
length1200.00 INCHES NOMINAL IN
materialPLASTIC POLYVINYL CHLORIDE (PVC) OVERALL
temp_rating-30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
unit_designPORTABLE
document_typePARTS LIST
overall_length0.250 INCHES NOMINAL IN
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
inside_diameter1.05 INCHES NOMINAL IN
outside_diameter1.30 INCHES NOMINAL IN
overall_diameter1.031 INCHES NOMINAL IN
style_designatorPLAIN CONDUIT
feather_edge_angle30.0 DEGREES NOMINAL
NSN5340-00-006-9830
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 27203 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATHER EDGE ANGLE: 30.0 DEGREES NOMINAL
•
MATERIAL: RUBBER OVERALL
•
BASE MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
OVERALL DIAMETER: 1.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FEATHER EDGE ANGLE30.0 DEGREES NOMINAL
MATERIALRUBBER OVERALL
BASE MATERIAL THICKNESS0.062 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.250 INCHES NOMINAL IN
OVERALL DIAMETER1.031 INCHES NOMINAL IN
OVERALL LENGTH0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
10346608Interchangeable
interchangeable cross-reference
interchangeable
AS3209-134Interchangeable
interchangeable cross-reference
interchangeable
2720-3Interchangeable
interchangeable cross-reference
interchangeable
D80089-7Interchangeable
interchangeable cross-reference
interchangeable
323-27203Interchangeable
interchangeable cross-reference
interchangeable
8433Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 27203?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27203?
27203 is a SOLENOID,ELECTRICAL manufactured by InLine.
What parts can replace 27203?
There are 7 known substitutes for 27203: 10346608, AS3209-134, 2720-3 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 27203?
27203 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-006-9830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27203

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026