M81935/4-04KL — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

M81935/4-04KL: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INTERNAL OUTER MEMBER, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_length: 1.8560 INCHES NOMINAL IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-352-2800, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M81935/4-04KL

NSN: 3120-01-352-2800
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	PLASTIC POLYTETRAFLUOROETHYLENE INTERNAL OUTER MEMBER
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_length	1.8560 INCHES NOMINAL IN
hardness_rating	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
thread_diameter	0.250 INCHES NOMINAL IN
special_features	KEY WAY IN SHANK
style_designator	BALL TYPE
thread_direction	LEFT-HAND
surface_treatment	CADMIUM AND CHROMATE ROD END BODY
inner_member_width	0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN
NSN	3120-01-352-2800

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 0.7440 INCHES MINIMUM AND 0.8060 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY

•

BORE CENTER TO SHANK END DISTANCE: 1.4330 INCHES MINIMUM AND 1.4530 INCHES MAXIMUM IN

•

INNER MEMBER WIDTH: 0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN

•

HARDNESS RATING: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER

•

OUTER MEMBER WIDTH: 0.2550 INCHES MINIMUM AND 0.2650 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: BALL TYPE

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	0.7440 INCHES MINIMUM AND 0.8060 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
BORE CENTER TO SHANK END DISTANCE	1.4330 INCHES MINIMUM AND 1.4530 INCHES MAXIMUM IN
INNER MEMBER WIDTH	0.3410 INCHES MINIMUM AND 0.3430 INCHES MAXIMUM IN
HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
OUTER MEMBER WIDTH	0.2550 INCHES MINIMUM AND 0.2650 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER

SUBSTITUTES & CROSS-REFERENCES 4

AS81935Reference document

Same NSN cross-reference

Reference document — Secondary reference

M81935/4-4KLReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-B-81935/4Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS81935/4Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M81935/4-04KL?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M81935/4-04KL?

M81935/4-04KL is a BEARING,PLAIN,ROD END.

What parts can replace M81935/4-04KL?

There are 4 known substitutes for M81935/4-04KL: AS81935, M81935/4-4KL, MIL-B-81935/4 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M81935/4-04KL?

M81935/4-04KL is cataloged in the U.S. Government catalog under NSN 3120-01-352-2800. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M81935/4-04KL — BEARING,PLAIN,ROD END

Request a Quote — M81935/4-04KL