SAE-AS81935/4 — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

SAE-AS81935/4: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INTERNAL OUTER MEMBER, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, overall_length: 2.595 INCHES NOMINAL IN, hardness_rating: 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-325-9897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

SAE-AS81935/4

NSN: 3120-01-325-9897
NIINs: 013259897, 013362298, 013522800, 013666625, 013837395, 015035926, 015826860, 016288836, 016518892
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	PLASTIC POLYTETRAFLUOROETHYLENE INTERNAL OUTER MEMBER
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
overall_length	2.595 INCHES NOMINAL IN
hardness_rating	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
thread_diameter	0.375 INCHES NOMINAL IN
special_features	KEY WAY IN SHANK
style_designator	BALL TYPE
thread_direction	LEFT-HAND
surface_treatment	CADMIUM ROD END BODY
inner_member_width	0.4040 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN
NSN	3120-01-325-9897

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 1.1560 INCHES MINIMUM AND 1.2180 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY

•

BORE CENTER TO SHANK END DISTANCE: 1.9380 INCHES MINIMUM AND 1.9580 INCHES MAXIMUM IN

•

INNER MEMBER WIDTH: 0.3730 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN

•

HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT

•

OUTER MEMBER WIDTH: 0.2860 INCHES MINIMUM AND 0.2960 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	1.1560 INCHES MINIMUM AND 1.2180 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
BORE CENTER TO SHANK END DISTANCE	1.9380 INCHES MINIMUM AND 1.9580 INCHES MAXIMUM IN
INNER MEMBER WIDTH	0.3730 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
OUTER MEMBER WIDTH	0.2860 INCHES MINIMUM AND 0.2960 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.312 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

M81935/4-05KReference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS81935Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-B-81935/4Reference document

Same NSN cross-reference

Reference document — Secondary reference

KBDE-5-101WSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy SAE-AS81935/4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is SAE-AS81935/4?

SAE-AS81935/4 is a BEARING,PLAIN,ROD END.

What parts can replace SAE-AS81935/4?

There are 4 known substitutes for SAE-AS81935/4: M81935/4-05K, AS81935, MIL-B-81935/4 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for SAE-AS81935/4?

SAE-AS81935/4 is cataloged in the U.S. Government catalog under NSN 3120-01-325-9897. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

SAE-AS81935/4 — BEARING,PLAIN,ROD END

Request a Quote — SAE-AS81935/4