PartsTable
Technical Data Sheet
Download PDF

ADLF16A010 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

ADLF16A010: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER, corner_shape: SQUARE INSIDE RIGHT CORNER, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 0.3745 INCHES NOMINAL IN, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-030-4716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ADLF16A010
NSN: 3120-01-030-4716
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
corner_shapeSQUARE INSIDE RIGHT CORNER
flange_width0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length0.3745 INCHES NOMINAL IN
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
style_designatorSOLID, EXTERNAL FLANGE ONE END
surface_treatmentANODIZE OUTER LAYER
body_inside_diameter1.0005 INCHES MINIMUM AND 1.0015 INCHES MAXIMUM IN
body_outside_diameter1.1893 INCHES MINIMUM AND 1.1903 INCHES MAXIMUM IN
flange_outside_diameter1.7300 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
specification/standard_data43999-LD131-0030 MANUFACTURERS STANDARD
material_document_and_classificationQQ-A-200/3,T8511 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER
NSN3120-01-030-4716
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: ADLF16A010 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER
FLANGE OUTSIDE DIAMETER1.7300 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER1.1893 INCHES MINIMUM AND 1.1903 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
KDJ16A010-342Reference document
Same NSN cross-reference
Reference document — Secondary reference
123-0216A010Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS81934/2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
KRJ16HDYB-16A010MReference document
Same NSN cross-reference
Reference document — Secondary reference
M81934/2Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-81934/2Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy ADLF16A010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ADLF16A010?
ADLF16A010 is a BEARING,SLEEVE.
What parts can replace ADLF16A010?
There are 9 known substitutes for ADLF16A010: KDJ16A010-342, 123-0216A010, AS81934/2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ADLF16A010?
ADLF16A010 is cataloged in the U.S. Government catalog under NSN 3120-01-030-4716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ADLF16A010