PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/08-JE1C2N1E1
M81793/08-JE1C2N1E1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/08-JE1C2N1E1 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-727-5955, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/08-JE1C2N1E1
NSN: 3110-00-727-5955
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/08-JE1C2N1E1
NSN3110-00-727-5955
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/08-JE1C2N1E1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHIELD QUANTITY: 2
•
LUBRICATION MATERIAL: GREASE
•
FLANGE WIDTH: 0.0420 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
OUTER RING OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SHIELD QUANTITY2
LUBRICATION MATERIALGREASE
FLANGE WIDTH0.0420 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
STANDARD TOLERANCE DESIGNATIONABEC NO.7
OUTER RING OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER0.6900 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
OLDENInterchangeable
interchangeable cross-reference
interchangeable
A2329Interchangeable
interchangeable cross-reference
interchangeable
E29Interchangeable
interchangeable cross-reference
interchangeable
BS6-1633PC6Interchangeable
interchangeable cross-reference
interchangeable
E5253DInterchangeable
interchangeable cross-reference
interchangeable
1559-4-03Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/08-JE1C2N1E1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/08-JE1C2N1E1?
M81793/08-JE1C2N1E1 is a M81793/08-JE1C2N1E1.
What parts can replace M81793/08-JE1C2N1E1?
There are 27 known substitutes for M81793/08-JE1C2N1E1: OLDEN, A2329, E29 and 24 more. Substitute compatibility should be verified for your specific system.
Is M81793/08-JE1C2N1E1 still available?
M81793/08-JE1C2N1E1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/08-JE1C2N1E1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026