PartsTable
Technical Data Sheet
PartsTable / MRO / A2329
A2329 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, body_width: 1.125 INCHES NOMINAL IN, body_height: 0.500 INCHES MAXIMUM IN, body_length: 1.125 INCHES NOMINAL IN, alignment_type: RIGID, inclosure_type: HERMETICALLY SEALED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8551, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A2329
NSN: 3110-00-100-8551
FSC: 3110
CAGE: 70801 — AUTOMOTIVE THRUST BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width1.125 INCHES NOMINAL IN
body_height0.500 INCHES MAXIMUM IN
body_length1.125 INCHES NOMINAL IN
alignment_typeRIGID
inclosure_typeHERMETICALLY SEALED
surface_finishGROUND
special_featuresBANDED OD
features_providedHYBRID AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS
inclosure_materialPLASTIC
storage_temp_range-55.0 TO 125.0 CELSIUS DEGC
operating_temp_range-25.0 TO 85.0 CELSIUS DEGC
NSN3110-00-100-8551
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A2329 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
SPECIAL FEATURESBANDED OD
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
E29Interchangeable
interchangeable cross-reference
interchangeable
BS6-1633PC6Interchangeable
interchangeable cross-reference
interchangeable
E5253DInterchangeable
interchangeable cross-reference
interchangeable
P524-24Interchangeable
interchangeable cross-reference
interchangeable
MS29513-218ESInterchangeable
interchangeable cross-reference
interchangeable
MS29513-218Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A2329?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A2329?
A2329 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace A2329?
There are 22 known substitutes for A2329: E29, BS6-1633PC6, E5253D and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A2329?
A2329 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8551. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A2329

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026