PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/07-ED1C2N1E1
M81793/07-ED1C2N1E1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/07-ED1C2N1E1 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-801-2317, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/07-ED1C2N1E1
NSN: 3110-00-801-2317
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/07-ED1C2N1E1
NSN3110-00-801-2317
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/07-ED1C2N1E1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.0937 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
FLANGE WIDTH: 0.0310 INCHES NOMINAL IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
RETAINER FABRICATION METHOD: PRESSED
•
SHIELD QUANTITY: 2
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.0937 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
FLANGE WIDTH0.0310 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
SHIELD QUANTITY2
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.5
OUTER RING OUTSIDE DIAMETER0.3125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
E44Interchangeable
interchangeable cross-reference
interchangeable
MS35238Interchangeable
interchangeable cross-reference
interchangeable
133615Interchangeable
interchangeable cross-reference
interchangeable
100866Interchangeable
interchangeable cross-reference
interchangeable
A2220732ISSUEBInterchangeable
interchangeable cross-reference
interchangeable
2220732Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/07-ED1C2N1E1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/07-ED1C2N1E1?
M81793/07-ED1C2N1E1 is a M81793/07-ED1C2N1E1.
What parts can replace M81793/07-ED1C2N1E1?
There are 9 known substitutes for M81793/07-ED1C2N1E1: E44, MS35238, 133615 and 6 more. Substitute compatibility should be verified for your specific system.
Is M81793/07-ED1C2N1E1 still available?
M81793/07-ED1C2N1E1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/07-ED1C2N1E1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026