Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN, open_end_inside_diameter: 0.653 INCHES MINIMUM AND 0.673 INCHES MAXIMUM IN, closed_end_overall_diameter: 0.813 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN, material_document_and_classification: L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-114-0206, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M5501-7-F17
NSN:5340-01-114-0206 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
PLASTIC, POLYETHYLENE (PP)
length_under_shoulder
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
open_end_inside_diameter
0.653 INCHES MINIMUM AND 0.673 INCHES MAXIMUM IN
closed_end_overall_diameter
0.813 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
material_document_and_classification
L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
NSN
5340-01-114-0206
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH UNDER SHOULDER: 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
•
CLOSED END OVERALL DIAMETER: 0.813 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
OPEN END INSIDE DIAMETER: 0.653 INCHES MINIMUM AND 0.673 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER
0.813 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501-7-F17?
M5501-7-F17 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace M5501-7-F17?
There are 23 known substitutes for M5501-7-F17: NAS847, MIL-C-5501/7, M5501/7-F24 and 20 more. Substitute compatibility should be verified for your specific system.
Is M5501-7-F17 still available?
M5501-7-F17 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.