PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/7-F24
M5501/7-F24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/7-F24 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-3506, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/7-F24
NSN: 5340-00-286-3506
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/7-F24
NSN5340-00-286-3506
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/7-F24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH UNDER SHOULDER: 1.274 INCHES MINIMUM AND 1.294 INCHES MAXIMUM IN
•
CLOSED END OVERALL DIAMETER: 1.175 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 1.103 INCHES MINIMUM AND 1.123 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER1.274 INCHES MINIMUM AND 1.294 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER1.175 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER1.103 INCHES MINIMUM AND 1.123 INCHES MAXIMUM IN
MATERIALPLASTIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
NAS844-8Upgraded Successor
successor cross-reference
successor
NAS847Upgraded Successor
successor cross-reference
successor
102C1279-1Upgraded Successor
successor cross-reference
successor
8028447Upgraded Successor
successor cross-reference
successor
353122-4Upgraded Successor
successor cross-reference
successor
17SUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/7-F24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/7-F24?
M5501/7-F24 is a M5501/7-F24.
What parts can replace M5501/7-F24?
There are 27 known substitutes for M5501/7-F24: NAS844-8, NAS847, 102C1279-1 and 24 more. Substitute compatibility should be verified for your specific system.
Is M5501/7-F24 still available?
M5501/7-F24 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/7-F24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026