Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 0.305 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, inside_diameter_length: 0.760 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH, material_document_and_classification: L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-170-6662, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M5501/9-F7
NSN:5340-01-170-6662 FSC:5340 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
material
PLASTIC
design_type
FRICTION
overall_diameter
0.305 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
inside_diameter_length
0.760 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
round_cap_outside_surface_condition
SMOOTH
material_document_and_classification
L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed
0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
NSN
5340-01-170-6662
COMPONENT DIAGRAM
KEY FEATURES
•
OVERALL DIAMETER: 0.305 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
INSIDE DIAMETER LENGTH: 0.760 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: PLASTIC
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER
0.305 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
INSIDE DIAMETER LENGTH
0.760 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITION
SMOOTH
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED
0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/9-F7?
M5501/9-F7 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace M5501/9-F7?
There are 21 known substitutes for M5501/9-F7: NAS847, MIL-C-5501/7, M5501/7-F24 and 18 more. Substitute compatibility should be verified for your specific system.
Is M5501/9-F7 still available?
M5501/9-F7 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.