PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/9-F29
M5501/9-F29 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/9-F29 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-192-6461, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/9-F29
NSN: 5340-01-192-6461
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/9-F29
NSN5340-01-192-6461
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/9-F29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.880 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 2.115 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
•
DESIGN TYPE: FRICTION
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OVERALL DIAMETER: 2.175 INCHES MINIMUM AND 2.265 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.880 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED2.115 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
DESIGN TYPEFRICTION
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER2.175 INCHES MINIMUM AND 2.265 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
NAS847Upgraded Successor
successor cross-reference
successor
MIL-C-5501/7Upgraded Successor
successor cross-reference
successor
M5501/7-F24Upgraded Successor
successor cross-reference
successor
AEP1543-2Upgraded Successor
successor cross-reference
successor
EC14Upgraded Successor
successor cross-reference
successor
36B505139P4Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/9-F29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/9-F29?
M5501/9-F29 is a M5501/9-F29.
What parts can replace M5501/9-F29?
There are 20 known substitutes for M5501/9-F29: NAS847, MIL-C-5501/7, M5501/7-F24 and 17 more. Substitute compatibility should be verified for your specific system.
Is M5501/9-F29 still available?
M5501/9-F29 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/9-F29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026