PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/7-F17
M5501/7-F17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/7-F17 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-114-0206, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/7-F17
NSN: 5340-01-114-0206
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/7-F17
NSN5340-01-114-0206
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/7-F17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH UNDER SHOULDER: 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
•
CLOSED END OVERALL DIAMETER: 0.813 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
OPEN END INSIDE DIAMETER: 0.653 INCHES MINIMUM AND 0.673 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER0.813 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
MATERIALPLASTIC, POLYETHYLENE (PP)
OPEN END INSIDE DIAMETER0.653 INCHES MINIMUM AND 0.673 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
NAS847Upgraded Successor
successor cross-reference
successor
MIL-C-5501/7Upgraded Successor
successor cross-reference
successor
M5501/7-F24Upgraded Successor
successor cross-reference
successor
17SUpgraded Successor
successor cross-reference
successor
194Upgraded Successor
successor cross-reference
successor
TC15-1714Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/7-F17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/7-F17?
M5501/7-F17 is a M5501/7-F17.
What parts can replace M5501/7-F17?
There are 23 known substitutes for M5501/7-F17: NAS847, MIL-C-5501/7, M5501/7-F24 and 20 more. Substitute compatibility should be verified for your specific system.
Is M5501/7-F17 still available?
M5501/7-F17 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/7-F17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026