PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/2-R12
M5501/2-R12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/2-R12 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-138-2170, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/2-R12
NSN: 5340-01-138-2170
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/2-R12
NSN5340-01-138-2170
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/2-R12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC
•
FEATURES PROVIDED: SHOULDER
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1.062-12 UN
•
OVERALL DIAMETER: 1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM IN
•
THREAD CLASS: 2A A
•
DRIVE TYPE: SCREW SLOT
•
DESIGN TYPE: THREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC
FEATURES PROVIDEDSHOULDER
THREAD SIZE AND SERIES/TYPE DESIGNATOR1.062-12 UN
OVERALL DIAMETER1.270 INCHES MINIMUM AND 1.350 INCHES MAXIMUM IN
THREAD CLASS2A A
DRIVE TYPESCREW SLOT
DESIGN TYPETHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L, GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
NAS847Upgraded Successor
successor cross-reference
successor
MIL-C-5501/7Upgraded Successor
successor cross-reference
successor
M5501/7-F24Upgraded Successor
successor cross-reference
successor
AEP1543-2Upgraded Successor
successor cross-reference
successor
EC14Upgraded Successor
successor cross-reference
successor
36B505139P4Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/2-R12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/2-R12?
M5501/2-R12 is a M5501/2-R12.
What parts can replace M5501/2-R12?
There are 20 known substitutes for M5501/2-R12: NAS847, MIL-C-5501/7, M5501/7-F24 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M5501/2-R12?
M5501/2-R12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-138-2170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/2-R12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026