PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M41006
M41006 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, overall_width: 0.459 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, loop_inside_diameter: 0.500 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.560 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-444-1018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M41006
NSN: 5340-01-444-1018
FSC: 5340
CAGE: 1BL81 — SPECTRO SCIENTIFIC, INC DBA SPECTRO INC (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
overall_width0.459 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
loop_inside_diameter0.500 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES NOMINAL IN
NSN5340-01-444-1018
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M41006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES NOMINAL IN
OVERALL WIDTH0.459 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
ECC-8Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M41006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M41006?
M41006 is a CLAMP,LOOP.
What parts can replace M41006?
There is 1 known substitute for M41006: ECC-8. Substitute compatibility should be verified for your specific system.
What is the NSN for M41006?
M41006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-444-1018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M41006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026