PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ECC-8
ECC-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, overall_width: 0.459 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, loop_inside_diameter: 0.500 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.560 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-444-1018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ECC-8
NSN: 5340-01-444-1018
FSC: 5340
CAGE: 63590 — SPC TECHNOLOGY - NEWARK (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
overall_width0.459 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
loop_inside_diameter0.500 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES NOMINAL IN
NSN5340-01-444-1018
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ECC-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES NOMINAL IN
OVERALL WIDTH0.459 INCHES MINIMUM AND 0.491 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
M41006Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ECC-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ECC-8?
ECC-8 is a CLAMP,LOOP.
What parts can replace ECC-8?
There is 1 known substitute for ECC-8: M41006. Substitute compatibility should be verified for your specific system.
What is the NSN for ECC-8?
ECC-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-444-1018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ECC-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026