PartsTable
Technical Data Sheet
PartsTable / MRO / M38527/08-010P

M38527/08-010P — Cable Assembly Specs

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The M38527/08-010P is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, overall_width: 1.010 INCHES NOMINAL IN, overall_height: 0.005 INCHES NOMINAL IN, overall_length: 1.526 INCHES NOMINAL IN, specification/standard_data: 81349-MIL-M-38527/8 GOVERNMENT SPECIFICATION, unthreaded_mounting_hole_diameter: 0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-008-5296, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ M38527/08-010P
NSN: 5999-01-008-5296
FSC: 5999
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
overall_width1.010 INCHES NOMINAL IN
overall_height0.005 INCHES NOMINAL IN
overall_length1.526 INCHES NOMINAL IN
specification/standard_data81349-MIL-M-38527/8 GOVERNMENT SPECIFICATION
unthreaded_mounting_hole_diameter0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
mounting_facility_type_and_quantity4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
NSN5999-01-008-5296
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN M38527/08-010P MFR M38527/08-010P
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
SPECIFICATION/STANDARD DATA: 81349-MIL-M-38527/8 GOVERNMENT SPECIFICATION
•
TEST DATA DOCUMENT: 81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
UNTHREADED MOUNTING HOLE DIAMETER: 0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH1.526 INCHES NOMINAL IN
OVERALL WIDTH1.010 INCHES NOMINAL IN
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE(S) SINGLE MOUNTING FACILITY
OVERALL HEIGHT0.005 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
SPECIFICATION/STANDARD DATA81349-MIL-M-38527/8 GOVERNMENT SPECIFICATION
TEST DATA DOCUMENT81349-MIL-M-38527 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER0.156 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
OVERALL LENGTH1.526 INCHES NOMINAL IN
OVERALL WIDTH1.010 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
3180099-18Interchangeable
interchangeable cross-reference
interchangeable
43-02-10Interchangeable
interchangeable cross-reference
interchangeable
MIL-M-38527/8Interchangeable
interchangeable cross-reference
interchangeable
M38527/8-26PInterchangeable
interchangeable cross-reference
interchangeable
M38526-1-048Interchangeable
interchangeable cross-reference
interchangeable
MIL-I-38526/1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMATSourcing: other
Ready to buy M38527/08-010P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M38527/08-010P?
M38527/08-010P is a M38527/08-010P. It is classified as a MRO (MRO_GENERAL).
What parts can replace M38527/08-010P?
There are 18 known substitutes for M38527/08-010P: 3180099-18, 43-02-10, MIL-M-38527/8 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M38527/08-010P?
M38527/08-010P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-01-008-5296. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M38527/08-010P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026