PartsTable
Technical Data Sheet

MIL-I-38526/1 — MIL-I-38526/1

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

MIL-I-38526/1: MIL-I-38526/1.

The MIL-I-38526/1 is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 1.250 INCHES NOMINAL IN, overall_height: 0.005 INCHES NOMINAL IN, overall_length: 1.730 INCHES NOMINAL IN, style_designator: FLAT, DIAMOND, fifth_hole_spacing: 0.215 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5970-00-133-4840, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MIL-I-38526/1
NSN: 5970-00-133-4840
NIINs: 001334840, 002644970, 004420862, 005699589, 010085296, 010439966, 010489171, 010504204, 010576696, 012497868
FSC: 5970 — Electrical Insulators and Insulating Materials
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width1.250 INCHES NOMINAL IN
overall_height0.005 INCHES NOMINAL IN
overall_length1.730 INCHES NOMINAL IN
style_designatorFLAT, DIAMOND
fifth_hole_spacing0.215 INCHES NOMINAL IN
first_hole_spacing0.271 INCHES NOMINAL IN
third_hole_spacing1.187 INCHES NOMINAL IN
first_hole_diameter0.140 INCHES NOMINAL IN
fourth_hole_spacing0.430 INCHES NOMINAL IN
second_hole_spacing0.593 INCHES NOMINAL IN
second_hole_diameter0.062 INCHES NOMINAL IN
NSN5970-00-133-4840
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MIL-I-38526/1 TITLE COMPONENT PN MIL-I-38526/1 MFR MIL-I-38526/1
KEY FEATURES
•
STYLE DESIGNATOR: ROUND, FLAT
•
OUTSIDE DIAMETER: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
UNABLE TO DECODE: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.002 INCHES NOMINAL IN
STYLE DESIGNATORROUND, FLAT
OUTSIDE DIAMETER0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
INSIDE DIAMETER0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
UNABLE TO DECODEUNABLE TO DECODE
SUBSTITUTES & CROSS-REFERENCES 8
3180099-18Reference document
Same NSN cross-reference
Reference document — Secondary reference
43-02-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
T511005518Reference document
Same NSN cross-reference
Reference document — Secondary reference
270-001-250Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ST21D21Reference document
Same NSN cross-reference
Reference document — Secondary reference
71502-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy MIL-I-38526/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-I-38526/1?
MIL-I-38526/1 is a MIL-I-38526/1. It is classified as a MRO (MRO_GENERAL).
What parts can replace MIL-I-38526/1?
There are 8 known substitutes for MIL-I-38526/1: 3180099-18, 43-02-10, T511005518 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-I-38526/1?
MIL-I-38526/1 is cataloged in the U.S. Government catalog under NSN 5970-00-133-4840. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-I-38526/1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.