PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M24135/1-06
M24135/1-06 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The M24135/1-06 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-051-5542, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M24135/1-06
NSN: 4720-00-051-5542
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM24135/1-06
NSN4720-00-051-5542
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M24135/1-06 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
BURST TEST PRESSURE: 16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
NONDEFINITIVE SPEC/STD DATA: 1 CLASS AND 6 SIZE
•
HYDROSTATIC TEST PRESSURE: 8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
INSIDE SURFACE CONDITION: SMOOTH
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-24135,TYPE 1,SIZE 6 GOVERNMENT SPECIFICATION
•
OPERATING PRESSURE: 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
BURST TEST PRESSURE16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIALRUBBER SYNTHETIC TUBE
NONDEFINITIVE SPEC/STD DATA1 CLASS AND 6 SIZE
HYDROSTATIC TEST PRESSURE8000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
SPECIFICATION/STANDARD DATA81349-MIL-H-24135,TYPE 1,SIZE 6 GOVERNMENT SPECIFICATION
OPERATING PRESSURE4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON AND WATER SINGLE RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
FC163-10Interchangeable
interchangeable cross-reference
interchangeable
FC163-1509-10Interchangeable
interchangeable cross-reference
interchangeable
KT-3070-3 ITEMInterchangeable
interchangeable cross-reference
interchangeable
SSN587-516-2507741PCF1-3TGInterchangeable
interchangeable cross-reference
interchangeable
MIL-H-24135/1Interchangeable
interchangeable cross-reference
interchangeable
4-191303-3/4-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M24135/1-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M24135/1-06?
M24135/1-06 is a M24135/1-06.
What parts can replace M24135/1-06?
There are 30 known substitutes for M24135/1-06: FC163-10, FC163-1509-10, KT-3070-3 ITEM and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M24135/1-06?
M24135/1-06 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-051-5542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M24135/1-06

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026